Solid State Drives

Kartse

The Unigen Kartse 2.5″ SSDs are designed for demanding enterprise storage and computing applications. Prioritizing high performance, long-term reliability, and optimized Total Cost of Ownership (TCO), these drives are powered by the SMI SM2259 controller. Featuring a proprietary shock-resistant space manager architecture, Kartse SSDs provide superior energy efficiency and reduced access times compared to traditional hard drives. The SM2259 processor, paired with tailored firmware, provides full ATA disk emulation, ensuring seamless compatibility across a wide range of legacy and modern operating systems. Backed by an excellent Mean Time Between Failure (MTBF) and dedicated OEM engineering support, the Kartse is built for the long haul.

Features

  • 120GB/ 240GB/ 280GB/ 960GB/ 1.92GB
  • TLC NAND
  • PLP Available
  • Available in NAND Types
  • 3D TLC Toshiba NAND
  • P/E cycles: 3,000
  • Supports TRIM, and SMART
  • Maximum Sequential Read: Up to 570 MB/s
  • Maximum Sequential Write: Up to 510 MB/s
  • Random 4Kb Reads: Up to 70,000 IOPs
  • Random 4Kb Writes: Up to 75,000 IOPS

Specifications

Appearance
Form Factor 2.5''
Interface
InterfaceSATA III 2.5''
Storage
Flash Type TLC
Capacity1.92TB, 960GB, 480GB, 240GB, 120GB
Operating Environment
Operating Humidity 5% to 95% , non-condensing
ShockOperating: 1,000G. Duration 0.5ms, half sine wave
VibrationOperating: 2.17 gms (5-700 Hz) ; Non-operating: 3.13 gms (5-800 Hz)
Power
Power Consumption (Active) up to 3600mw
Power Consumption (Idle) ~1100W
Performance
Sequential Read (max.) Up to 570 MB/s
Sequential Write (max.) Up to 570 MB/s
Mean Time Between Failures > 1,750,000 hours
Technology
Power Loss Protection No
DRAM Cache Yes
Error Correction Codes Yes

Ordering Information

Part NumberCapacity
UB88SMR120HID1-HTI-UGN 120GB
UB88SMR240HID1-HTI-UGN 240GB
UB88SMR480HID1-ITI-UGN 480GB
UB88SMR960HID1-ITI-UGN 960GB
UB88SMR01T9ID1-ITI-UGN 1.92GB
Scroll to Top